1.Y. Yang, B. Zhang, H. Wu, Y. Zhang, Hong. Zhang*, Y. Liu, Q. Wang, A deep learning approach for low-cycle fatigue life prediction under thermal–mechanical loading based on a novel neural network model, Engineering Fracture Mechanics 306 (2024). 2.T. Zou, M. Liu, Q. Wang, Y. Jiang, H. Wu, Hong. Zhang*, Y. Pei, Y. Liu, Q. Wang, New approach to low-cycle fatigue lifetime prediction for deep-rectangular notched components with finite residual thickness: Experiment and simulation, International Journal of Fatigue (2024) 108380. 3.Y. Jiang, T. Zou, M. Liu, Q. Wang, Y. Pei, Hong. Zhang*, Y. Liu, Q. Wang, Tensile Deformation Behaviors and Microstructure Evolution Under Various Temperatures for MAR‐M247 Nickel‐Based Superalloy, Adv Eng Mater (2024) 2302056. 4.Hong. Zhang, Y. Jiang*, M. Liu, T. Zou, Q. Wang, H. Wu, Y. Pei, Y. Liu, Q. Wang, The Effect of Laser Shock Peening with Different Power Density on the Microstructure Evolution and Mechanical Properties of MAR-M247 Nickel-base alloy, Journal of Materials Research and Technology (2024). 5.T. Zou, M. Liu, Q. Wang, Y. Jiang, H. Wu, Z. Gao, Y. Pei, Hong. Zhang*, Y. Liu, Q. Wang, Evolutionary mechanisms in the plastic deformation of γ'-Ni3(Al, Ti)-strengthened additively manufactured nickel-based 939 superalloys at intermediate temperatures, Materials & Design (2024) 112795. 6.M. Liu, T. Zou, Q. Wang, Y. Jiang, H. Wu, Y. Pei, Hong. Zhang*, Y. Liu, Q. Wang, Microstructure evolution, failure mechanism and life prediction of additively manufactured Inconel 625 superalloy with comparable low cycle fatigue performance, International Journal of Fatigue 181 (2024) 108142. 7.Y. Jiang, M. Liu, T. Zou, Q. Wang, H. Wu, Y. Pei, Hong. Zhang*, Y. Liu, Q. Wang, Numerical simulation and high cycle fatigue behaviour study on shot peening of MAR-M247 Nickel-based alloy, International Journal of Fatigue (2024) 108161. 8.Q. Wang, M. Liu, T. Zou, Y. Jiang, Z. Gao, Y. Pei, Hong. Zhang*, Y. Liu, Q. Wang, The cyclic deformation behavior and microstructural evolution of 304L steel manufactured by selective laser melting under various temperatures, Materials Science and Engineering: A (巴黎人娱乐城官方网址) 145949. 9.T. Zou, Q. Wang, Y. Pei, T. Mei, Hong. Zhang*, Mechanisms of Serrated Flow and Microstructural Evolution in MarBN Steel, Materials 16(19) (巴黎人娱乐城官方网址) 6411. 10.Q. Wang, Y. Cai, M. Liu, Q. Li, Y. Pei, Hong. Zhang*, Y. Liu, Q. Wang, The cyclic response behavior, failure mechanism, and life prediction model of 9% Cr‐based steel under different strain ratios in the low cyclic fatigue regime at 430°C, Fatigue & Fracture of Engineering Materials & Structures (巴黎人娱乐城官方网址). 11.Y. Zhang, Hong. Zhang*, T. Zou, M. Liu, Q. Wang, Y. Pei, Y. Liu, Q. Wang, Microstructure-Based Multiscale Modeling of Deformation in MarBN Steel under Uniaxial Tension: Experiments and Finite Element Simulations, Materials 16(14) (巴黎人娱乐城官方网址). 12.M. Liu, Y. Cai, Q. Wang, Y. Jiang, T. Zou, Y. Wang, Q. Li, Y. Pei, Hong. Zhang*, Y. Liu, Q. Wang, The low cycle fatigue property, damage mechanism, and life prediction of additively manufactured Inconel 625: Influence of temperature, Fatigue & Fracture of Engineering Materials & Structures (巴黎人娱乐城官方网址). 13.Q. Wang, F. Yang, T. Zou, M. Liu, Y. Jiang, Y. Pei, Hong. Zhang*, Y. Liu, Q. Wang, Effect of microstructure on the fatigue crack growth behavior of 9%Cr martensitic steel at different stress ratios under 630 ℃, International Journal of Fatigue 175 (巴黎人娱乐城官方网址) 107796. 14.T. Zou, M. Liu, Y. Cai, Q. Wang, Y. Jiang, Y. Wang, Z. Gao, Y. Pei, Hong. Zhang*, Y. Liu, Q. Wang, Effect of temperature on tensile behavior, fracture morphology, and deformation mechanisms of Nickel-based additive manufacturing 939 superalloy, Journal of Alloys and Compounds (巴黎人娱乐城官方网址) 170559. 15.T. Zou, M. Liu, Y. Cai, Q. Wang, Y. Jiang, Y. Wang, Y. Pei, Hong. Zhang*, Y. Liu, Q. Wang, Analysis of the Tensile Deformation Behaviors and Microstructure Characterization under Various Temperatures of MarBN Steel by EBSD, Materials, 巴黎人娱乐城官方网址. 16.Y. Jiang, T. Zou, M. Liu, Y. Cai, Q. Wang, Y. Wang, Y. Pei, Hong. Zhang*, Y. Liu, Q. Wang, Temperature and Strain Rate Dependence on the Tensile Mechanical Properties, Constitutive Equations, and Fracture Mechanisms of MarBN Steel, Materials, 巴黎人娱乐城官方网址. 17.Q. Wang, M. Liu, Y. Cai, T. Wang, Y. Pei, Hong. Zhang*, Y. Liu, Q. Wang, The high cycle fatigue behavior, failure characteristics, and fatigue life empirical relationship of 9% Cr steel under different stress ratios at 630 °C, International Journal of Fatigue 170 (巴黎人娱乐城官方网址). 18.Hong Zhang, D. Lu, Y. Pei, T. Chen, T. Zou, T. Wang, X. Wang, Y. Liu, Q. Wang, Tensile behavior, microstructural evolution, and deformation mechanisms of a high Nb-TiAl alloy additively manufactured by electron beam melting, Materials & Design 225 (巴黎人娱乐城官方网址). 19.Y. Cai, Q. Wang, M. Liu, Y. Jiang, T. Zou, Y. Wang, Q. Li, Y. Pei, Hong Zhang*, Y. Liu, Q. Wang, Tensile Behavior, Constitutive Model, and Deformation Mechanisms of MarBN Steel at Various Temperatures and Strain Rates, Materials 15(24) (2022) 8745. 20.Hong Zhang, Yubing. Pei, Xiufang Gong, Xiaohui Chen, Wei Zhang, Peng Zhang, Lang Li, Yongjie Liu, Qingyuan Wang, Deformation nanotwins in a single-crystal Ni-based superalloy at room temperature and low strain rate, Mater Charact 187 (2022) 111865. 21.Tianjian Wang, Hong Zhang*, Chunhua Liu, Xiufang Gong, Yubing Pei, Yu Zou, Yongjie Liu, Qingyuan Wang, Effect of temperature on tensile behavior, fracture morphology and deformation mechanisms of Nickel-based single crystal CMSX-4, Journal of Alloys and Compounds (2022) 165175. 22.Ma Yaxin, Zhang Hong*, Gao Yifei, Men Zhengxing, He Ling, Cao Jianguo, Failure analysis of a natural gas transmission X60 steel pipeline, Anti-Corrosion Methods and Materials 2022. 23.Hong Zhang, Quanyi Wang, Xiufang Gong, Tianjian Wang, Yubing Pei, Wei Zhang, Yongjie Liu, Chong Wang, Qingyuan Wang, Comparisons of low cycle fatigue response, damage mechanism, and life prediction of MarBN steel under stress and strain-controlled modes, International Journal of Fatigue 149 (巴黎人娱乐城). 24.Hong Zhang, Quanyi Wang, Xiufang Gong, Tianjian Wang, Wei Zhang, Ke Chen, Chong Wang, Yongjie Liu*, Qingyuan Wang, Dependence on temperature of compression behavior and deformation mechanisms of Nickel-based single crystal CMSX-4[J]. Journal of Alloys and Compounds, (巴黎人娱乐城) 158878. 25.Xiufang Gong, Tianjian Wang, Qingsong Li, Yongjie Liu, Hong Zhang*, Wei Zhang, Quanyi Wang, Qingyuan Wang, Cyclic responses and microstructure sensitivity of Cr-based turbine steel under different strain ratios in low cycle fatigue regime, Materials & Design (巴黎人娱乐城) 109529. 26.X. Zhang, T. Wang, X. Gong, Q. Li, Y. Liu, Q. Wang, Hong Zhang*, Q. Wang, Low cycle fatigue properties, damage mechanism, life prediction and microstructure of MarBN steel: Influence of temperature[J]. International Journal of Fatigue, 巴黎人娱乐城, 144:106070. 27.Liu, Meng, Quanyi Wang, Yifan Cai, Dong Lu, Tianjian Wang, Yubing Pei, Hong Zhang*, Yongjie Liu, and Qingyuan Wang, Comparison in Deformation Behavior, Microstructure, and Failure Mechanism of Nickel Base Alloy 625 under Two Strain Rates, Materials. 巴黎人娱乐城; 14(10):2652. 28.Hong Zhang, Peidong Li, Xiufang Gong, Tianjian Wang, Lang Li, Yongjie Liu, Qingyuan Wang, Tensile properties, strain rate sensitivity and failure mechanism of single crystal superalloys CMSX-4, Materials Science and Engineering: A (2020) 782(24). 29.Q. Wang, Q. Wang, X. Gong, T. Wang, W. Zhang, L. Li, Y. Liu, C. He, C. Wang, Hong Zhang*, A comparative study of low cycle fatigue behavior and microstructure of Cr-based steel at room and high temperatures, Materials & Design 195 (2020) 109000. 30.Q. Wang, Y. Chen, Y. Liu, C. Wang, L. Li, C. He, X. Gong, T. Wang, W. Zhang, Q. Wang, Hong Zhang*, The Effect of Stress Ratios on the Very High Cycle Fatigue Behavior of 9%Cr Turbine Steel at 630 °C, Materials 13(216) (2020) 3444. 31.Hong Zhang, P. Li, Q. Wang*, Z. Guan, Y. Liu, X. Gong, Electron Beam Welding of Nimonic 80A Superalloy: Microstructure Evolution and EBSD Study After Aging Heat Treatment, Journal of Materials Engineering and Performance 28(2) (2019) 741-752. 32.Hong Zhang, P. Li, Q. Wang*, Y. Liu, Fatigue Crack Propagation of Nickel-Based Superalloy: Experiments and Simulations with Extended Finite Element Method, Journal of Materials Engineering and Performance 28(2) (2019) 967-972. 33.Hong Zhang, J.K. Li, Z.W. Guan, Y.J. Liu, D.K. Qi, Q.Y. Wang*, Electron beam welding of Nimonic 80A: Integrity and microstructure evaluation, Vacuum 151 (巴黎人娱乐城) 266-274. 34.Hong Zhang, M. Zhengxing, L. Jiukai, L. Yongjie, W. Qingyuan*, Numerical Simulation of the Electron Beam Welding and Post Welding Heat Treatment Coupling Process, High Temperature Materials and Processes 37(9-10) (巴黎人娱乐城) 793-800. 35.Hong Zhang, Huang C, Guan Z, Li J, Liu Y, Chen R, Wang Q*. Effects of the Electron Beam Welding Process on the Microstructure, Tensile, Fatigue and Fracture Properties of Nickel Alloy Nimonic 80A[J]. Journal of Materials Engineering and Performance, 2017,27:(1): 89-98. 36.Hong Zhang, Z.W. Guan, Q.Y. Wang, Y.J. Liu, J.K. Li, Effects of Stress Ratio and Microstructure on Fatigue Failure Behavior of Polycrystalline Nickel Superalloy, Journal of Materials Engineering and Performance 27(5) (巴黎人娱乐城) 2534-2544. 37.P. Zhang, Y. Yuan, J. Li, J.B. Yan, Hong Zhang, X.B. Zhao, X.B. Shi, Y.F. Gu, Deformation Modes in the Single-Crystal Nickel-Based Superalloy CMSX-4 During Compressive Deformation at 1000 °C, Metall and Mat Trans A 53(2) (2022) 388-393. 38.Y. Liu, Y. Chen, C. He, F. Liu, K. Yang, L. Li, Hong Zhang, C. Wang, Q. Wang, Vacuum retarding and air accelerating effect on the high-cycle and very-high-cycle fatigue behavior of a ZK60 magnesium alloy, Materials & Design, (2020) 109310. 39.P. Li, Y. Liu, Hong Zhang, Q. Wang*, Indentation on a half-infinite one-dimensional hexagonal quasi-crystal space by a rigid flat-ended cylindrical indenter with uniform heat flux or temperature, Mechanics of Materials 131 (2019) 33-46. 40.P. Li, Hong Zhang, Q. Wang, B. Shao, H. Fan, Effect of temperature on the performance of laterally constrained dielectric elastomer actuators with failure modes, Journal of Applied Polymer Science, 137 (2020). 41.Y. Chen, C. He, K. Yang, Hong Zhang, C. Wang, Q. Wang, Y. Liu, Effects of microstructural inhomogeneities and micro-defects on tensile and very high cycle fatigue behaviors of the friction stir welded ZK60 magnesium alloy joint, International Journal of Fatigue 122 (2019) 218-227. 42.Y. Liu, Y. Chen, C. He, F. Liu, K. Yang, L. Li, Hong Zhang, C. Wang, Q. Wang, Vacuum retarding and air accelerating effect on the high-cycle and very-high-cycle fatigue behavior of a ZK60 magnesium alloy, Materials & Design (2020) 109310. 43.F. Liu, Hong Zhang, H. Liu, Y. Chen, K. Muhammad Kashif, Q. Wang, Y. Liu, Influence of Welded Pores on Very Long-Life Fatigue Failure of the Electron Beam Welding Joint of TC17 Titanium Alloy, Materials 12(11) (2019) 1825. 44.门正兴, 郑金辉, 王昌飞, 张宏, 刘建超, 马亚鑫, 岳太文, 激光选区熔化成形Ti6Al4V钛合金叶片的超高周疲劳行为, 锻压技术, 45 (2020) 89-93+125. 45.张宏, 李久楷, 刘永杰, 王清远*, GH80A镍合金电子束焊接接头旋转弯曲高周疲劳行为研究, 工程科学与技术 49(04) (2017) 188-195. 46.李久楷, 刘永杰, 张宏, 杨昆, 王清远*, Ti-6Al-4V在模拟体液中的超高周疲劳裂纹萌生与扩展, 实验力学 31(06) (2016). 47.孙德润,张宏,门正兴,冷却速度对铸件二次枝晶臂间距影响的模拟研究,大型铸锻件,2014(04):1-3+10 48.瞿贵峰,门正兴,李英,张宏,有色金属轧机工作辊感应淬火过程数值模拟分析,大型铸锻件, 2014(05):11-13 49.王秋林, 李明富, 门正兴, 李勇, 张宏*, 激光熔化沉积制造翅片热管管壳, 热加工工艺 1-5. 50.曾小平, 王秋林, 马亚鑫, 张宏*, 7075铝合金激光熔覆Al-Cr复合涂层, 粉末冶金工业 1-7. 51.门正兴, 郑金辉, 王昌飞, 张宏*, 激光选区熔化成形Ti6Al4V钛合金叶片的超高周疲劳行为, 锻压技术 45(11) (2020) 89-93+125. |